The key to the Jet Press 1160CFG’s advanced capability is a unique Paper Stabiliser Unit that ensures high coverage, 1200dpi quality print is delivered with consistent high quality and reliability.

This unique technology eliminates the two major challenges associated with water-based inkjet technologies used in high speed presses:
• Controlling the behaviour of a range of paper types
• Effective drying of inkjet printed paper

Advanced Paper Stabiliser Unit

Paper is often the most difficult variable in the printing process to control. It can react differently depending on the local humidity, temperature and other outside factors.

The Paper Stabiliser Unit is not a pre-coat or priming station. There are no consumables to apply, replenish or pay for. The paper stabiliser does exactly that, eliminating the stress and shocks that paper normally experiences in other inkjet presses.

Precisely controlled heating and cooling of the paper before printing conditions the paper for a smooth, stress-free progression through the press, to give the best possible printed result.

Before entering the imaging section, the paper goes through a pre-drying process which minimises rapid paper expansion and contraction within the press. The paper stabiliser helps to reduce paper curling and misalignment, ensuring a smooth and stable paper feed, thereby increasing registration accuracy, improving print quality and reducing waste.

The benefits of paper stabilisation:

The Jet Press 1160CFG won’t shrink away from a challenge

The paper stabiliser reduces the cycle of paper shrinking and swelling with each round of printing and drying. Dimensional stability is dramatically improved leading to accurate and reliable front to back registration.

Early intervention from the paper stabiliser reduces the stresses and strains on the paper as it is printed. Swelling and shrinking is eliminated improving the condition of the paper throughout the print process.

Minimise wavy sheets and books

The chance of producing wavy books is reduced too. This is essential for high quality print on coated stocks with higher ink coverage, which are the most susceptible to waviness. The phenomenon of swelling and shrinking is even more pronounced between areas of heavy ink coverage and non-image areas. The stresses of heating and cooling, wet and dry, are significantly reduced with the Jet Press 1160CFG, leading to flatter sheets and books. Less stress means flatter books.

Stabilised paper, represented by the green line, swells and shrinks less as it carries less moisture overall from the start of printing the first side, to the end of drying the back side.

Media flexibility

The Jet Press 1160CFG paper stabiliser helps expand media compatibility including common offset stocks. You can also print on both thinner and thicker stocks, meaning you can take advantage of current paper stocks, simplifying inventory and reducing costs.

Prints beautifully on offset coated paper

The newly developed aqueous pigment ink prints beautifully on both coated and uncoated paper without a primer. By reducing moisture levels before printing, the Jet Press creates a less volatile environment for the paper with

lower changes in temperature and moisture content. Paper stabilisation reduces issues at the time of printing and down the line during post processing and finishing.

Avoid dirty guide rollers and print white spots

Without the paper stabiliser, ink can attack the paper coating by penetrating deep into the paper base. This leads to a weak surface that can be picked off the sheet making guide rollers dirty and leaving white spots in the print.

Stabilised paper has a more robust surface, avoiding white spots and providing better rub resistance of the finished print.

You need to produce short to medium run, high quality colour books, journals, brochures and catalogues

The Jet Press 1160CFG has the quality and speed to produce high quality publications on light to heavyweight stocks. Its unique features overcome the common challenges facing other, less capable high speed inkjet presses.

You need to fulfil direct mail campaigns in medium to high volumes on quality stocks

Direct mail is changing to compete in an ever-more challenging communications environment. As campaigns become more creative and targeted, the Jet Press 1160CFG has the capability to run higher quality mail pieces at higher speed with greater consistency.

You need to move jobs away from analogue processes that are less capable and efficient

Offset printing presses are ideally suited to long run, static jobs but are increasingly being used for short to medium run work. Presses become stacked with inefficient work leaving little time for the jobs that pay. Jobs moved to the Jet Press 1160CFG can be produced on the same paper stocks at comparable quality using technologies exclusive to Fujifilm.

Fujifilm is ideally placed to maximise the benefits of this exclusive system with:
• A heritage in inkjet printing over the last 25 years.
• A long history of continuous inkjet printing, with the highest market share for the supply and service of these presses in the Asia Pacific region.
• A deep understanding of the print industry with over 90 years experience – from the supply of offset plates and film to the latest digital technologies.

Deliver high quality, consistent and accurate colour output while optimising workflow efficiency and productivity.

XMF ColorPath, Fujifilm’s cloud-based colour management system, allows printers to create optimised colour profiles and calibrations to print to various standards, and provides tools to ensure that over time the standards are continually adhered to, all while achieving superior print results and meeting the demanding requirements of today’s print market.

Manage and monitor colour performance

The key to good colour management is the creation of accurate device link colour profiles, the ability to easily print to ISO standards, and above all to have a system that makes it easy to check and verify that standards are continuously being met. All of this and more is achieved with XMF ColorPath, Fujifilm’s cloud-based colour management solution. Optimised curve data and ICC profiles can be quickly and easily created in the cloud and deployed for everyday production within XMF Workflow.

Key features
• Cloud-based colour management
• Align offset and digital presses to ISO or G7 standards
• Optimise ink usage while maintaining conformance to ISO and G7 standards
• Create optimised colour profiles to allow for GRACoL and FOGRA standard proofing
• Verify if digital proofs and prints are within the tolerance limits of industry standards
G7® and GRACoL® are trademarks of Idealliance Control your colour.

The Jet Press 1160CFG can replace traditional offset production for a variety of print jobs, therefore bringing the sustainability benefits of digital printing to a wider range of print production.

The many environmental benefits of digital print are well documented, including the elimination of make-ready waste between jobs, the removal of the plate production process, the requirement for fewer press chemicals, and smaller stock holdings due to the on-demand nature of digital print.

Super EA-Eco toner

With Super EA-Eco toner, particle sizes have been reduced to be the smallest in the industry, with the toner particle shape standardised to enable the super-sharp rendering of detailed characters and fine lines.

In addition, gradations, halftones and midtones are reproduced more smoothly and dot shapes more faithfully, delivering exceptional print quality.

LED printhead

The Revoria Press EC2100 & EC2100S benefit from a high resolution LED printhead, which produces incredible, high definition print:

2400 x 2400 dpi LED printhead
Delivers high resolution output for sharp lines and images, enabling high-definition printing.

Space saving, power saving
The size of the LED printhead has been reduced to 1/12 of the size of the previous generation VCSEL-ROS used previously. Since there is no motor, it consumes little power, makes no noise, and means image reproduction is incredibly stable.

High image quality
In order to achieve the high image quality required for production printers, we have improved and further evolved the development and transfer unit and associated technologies.

Real time, intelligent print optimisation

The Revoria Press EC2100 & EC2100S incorporate an optional Smart Monitoring Gate D1 which monitors the colour and front to back registration of print jobs as they are being printed.

Top-speed printing of 100 ppm with all paper weights

The Revoria Press EC2100 & EC2100S are capable of printing up to 100ppm A4 CMYK, and up to 55ppm for A3 CMYK. This speed is achieved for all media weights of between 52g and 400g.

New Bias Transfer Belt

The use of a new Bias Transfer Belt (BTB) system instead of the conventional Bias Transfer Roll (BTR) ensures paper transport is more stable, and therefore reliable, and allows a wider range of applications to be printed. The new system automatically adjusts the nip pressure according to the thickness of the paper, improving the transfer of toner. This mechanism is new in the Revoria EC2100 & EC2100S and produces superior print quality, particularly on embossed paper.

Load switching mechanism at the lead edge

Fujifilm has equipped the EC2100 & EC2100S with a flywheel that provides an inertial force to the transfer belt roll for stable driving. The rotation of the flywheel and inertial force suppress the vibration of the transfer belt, enabling stable transfer of media even for heavyweight paper.

New developer technology

Deterioration of the developer is one of the reasons why print quality can be unstable over a period of time. In conventional horizontal marking modules, some of the developing material that has been used once can find its way back to the development roll again, potentially affecting the print quality.

In the new vertical development system used in the EC2100 & EC2100S, the condition of the developer material is refreshed before it is fed back to the development roll. In this way all the developer used is always perfectly conditioned and fresh, which is why the Revoria EC2100 & EC2100S print so beautifully over time, and particularly on thick, rough and embossed papers.

A range of advanced marking technologies have been introduced in the Revoria Press EC2100 & EC2100S that have improved paper handling capabilities, extending the variety of applications that can be printed, and increasing machine uptime across a wide variety of substrates.

Embossed paper, rough paper, thick paper
The newly developed Advanced Single Layer Belt (A-SLB), secondary transfer load switching mechanism, and toner condition stabilisation technology, have greatly improved the transfer of toner to embossed and thick paper.

Plain paper, rough paper
By improving both image formation and image transfer technologies, we have improved the print quality achievable on plain and rough paper. In addition, we have developed an optimal transfer electric field stabilisation technology for each paper type, improving the ability to print uniform densities.

Thick paper, envelopes
Two new paper transfer technologies result in industry-leading paper handling capabilities for thick paper and envelopes. Both these new technologies mean thick paper and envelopes are can be printed wrinkle-free consistently:

• New secondary transfer load switching mechanism changes the pressure to hold the paper according to the paper thickness
• New transfer torque variable mechanism stabilises the paper feed

Thin paper
The use of a belt-type transfer device, rather than roll-type, improves the versatility of printing on thin paper.

Postcards
By blocking the area outside the paper path with a shutter, the paper adsorption is enhanced and the stability of handling postcards through the printer is improved.

Static Eliminator
• The optional Static Eliminator D1 provides a remarkable static elimination effect on a wide range of media, including single-layer film, synthetic paper, water-resistant paper, and tack paper.
• The charge can be adjusted from 0 to 99, and can also be set while the press is running.

Real-time curl correction
• A compact, built-in decurler judges and automatically corrects the paper curl caused by the type of paper or the image density, one page at a time in real time. High quality output with stable paper travel and curl suppression is possible.
• The optional Interface Decurler Module D1 offers easy additional curl correction steps, saving the time required for curl adjustments where the printing media is changing frequently.

Air Suction Feeder

The optional Air Suction Feeder improves the feed performance of paper with a lot of paper dust, pre-printed paper using powder, paper with an uneven texture, and coated paper. A stable and high-speed feed is achieved for various paper types, from lightweight to heavyweight, small-sized paper and banner sheets.

The shuttle head draws up the paper strongly using a small amount of air, separating and delivering each sheet reliably. The active head avoids friction on the paper surface, which can be a problem with other suction feeding technologies.

The Revoria Press EC2100 & EC2100S are equipped with a number of energy saving features, for example the LED printhead and Super EA-Eco toner, to minimise energy consumption during printing.

The printers have also received ‘Superior De-inkability’ certification from the renowned industry-body INGEDE, meaning toner can be easily removed from print produced by the presses. This ensures that any printed output can be more easily recycled, further enhancing the sustainability credentials of the presses.

The print outputs of the Revoria Press EC2100 & EC2100S were tested according to INGEDE Method 11 and assessed according to the ‘Assessment of Printed Product Recyclability – De-inkability Score’ (EPRC 2017).

The total score is 100/100 achievable points

The Revoria Press EC2100 & EC2100S incorporate a completely new ‘Vertical Development System’, along with an ultra-compact LED printhead. The result is a 5 colour press which is the same size as its 4 colour predecessor, the Revoria Press EC1100.

Super EA-Eco toner

With Super EA-Eco toner, particle sizes have been reduced to be the smallest in the industry, with the toner particle shape standardised to enable the super-sharp rendering of detailed characters and fine lines.

In addition, gradations, halftones and midtones are reproduced more smoothly and dot shapes more faithfully, delivering exceptional print quality.

LED printhead

The Revoria Press SC285 & SC285S benefit from a high resolution LED printhead, which produces incredible, high definition print:

2400 x 2400 dpi LED printhead
Delivers high resolution output for sharp lines and images, enabling high-definition printing.

Space saving, power saving
The size of the LED printhead has been reduced to 1/12 of the size of the previous generation VCSEL-ROS used previously. Since there is no motor, it consumes little power, makes no noise, and means image reproduction is incredibly stable.

High image quality
In order to achieve the high image quality required for production printers, we have improved and further evolved the development and transfer unit and associated technologies.

Real time, intelligent print optimisation

The Revoria Press SC285 & SC285S incorporate an optional Smart Monitoring Gate D1 which monitors the colour and front to back registration of print jobs as they are being printed.

Top-speed printing of 85 ppm with all paper weights

The Revoria Press SC285 & SC285S are capable of printing up to 85ppm A4 CMYK, and up to 47ppm for A3 CMYK. This speed is achieved for all media weights of between 52g and 400g.

New Bias Transfer Belt

The use of a new Bias Transfer Belt (BTB) system instead of the conventional Bias Transfer Roll (BTR) ensures paper transport is more stable, and therefore reliable, and allows a wider range of applications to be printed. The new system automatically adjusts the nip pressure according to the thickness of the paper, improving the transfer of toner. This mechanism is new in the Revoria SC285 & SC285S and produces superior print quality, particularly on embossed paper.

Load switching mechanism at the lead edge

Fujifilm has equipped the SC285 & SC285S with a flywheel that provides an inertial force to the transfer belt roll for stable driving. The rotation of the flywheel and inertial force suppress the vibration of the transfer belt, enabling stable transfer of media even for heavyweight paper.

New developer technology

Deterioration of the developer is one of the reasons why print quality can be unstable over a period of time. In conventional horizontal marking modules, some of the developing material that has been used once can find its way back to the development roll again, potentially affecting the print quality.

In the new vertical development system used in the SC285 & SC285S, the condition of the developer material is refreshed before it is fed back to the development roll. In this way all the developer used is always perfectly conditioned and fresh, which is why the Revoria SC285 & SC285S print so beautifully over time, and particularly on thick, rough and embossed papers.

A range of advanced marking technologies have been introduced in the Revoria Press SC285 & SC285S that have improved paper handling capabilities, extending the variety of applications that can be printed, and increasing machine uptime across a wide variety of substrates.

Embossed paper, rough paper, thick paper
The newly developed Advanced Single Layer Belt (A-SLB), secondary transfer load switching mechanism, and toner condition stabilisation technology, have greatly improved the transfer of toner to embossed and thick paper.

Plain paper, rough paper
By improving both image formation and image transfer technologies, we have improved the print quality achievable on plain and rough paper. In addition, we have developed an optimal transfer electric field stabilisation technology for each paper type, improving the ability to print uniform densities.

Thick paper, envelopes
Two new paper transfer technologies result in industry-leading paper handling capabilities for thick paper and envelopes. Both these new technologies mean thick paper and envelopes are can be printed wrinkle-free consistently:

• New secondary transfer load switching mechanism changes the pressure to hold the paper according to the paper thickness
• New transfer torque variable mechanism stabilises the paper feed

Thin paper
The use of a belt-type transfer device, rather than roll-type, improves the versatility of printing on thin paper.

Postcards
By blocking the area outside the paper path with a shutter, the paper adsorption is enhanced and the stability of handling postcards through the printer is improved.

Static Eliminator
• The optional Static Eliminator D1 provides a remarkable static elimination effect on a wide range of media, including single-layer film, synthetic paper, water-resistant paper, and tack paper.
• The charge can be adjusted from 0 to 99, and can also be set while the press is running.

Real-time curl correction
• A compact, built-in decurler judges and automatically corrects the paper curl caused by the type of paper or the image density, one page at a time in real time. High quality output with stable paper travel and curl suppression is possible.
• The optional Interface Decurler Module D1 offers easy additional curl correction steps, saving the time required for curl adjustments where the printing media is changing frequently.

Air Suction Feeder

The optional Air Suction Feeder improves the feed performance of paper with a lot of paper dust, pre-printed paper using powder, paper with an uneven texture, and coated paper. A stable and high-speed feed is achieved for various paper types, from lightweight to heavyweight, small-sized paper and banner sheets.

The shuttle head draws up the paper strongly using a small amount of air, separating and delivering each sheet reliably. The active head avoids friction on the paper surface, which can be a problem with other suction feeding technologies.

The Revoria Press SC285 & SC285S are equipped with a number of energy saving features, for example the LED printhead and Super EA-Eco toner, to minimise energy consumption during printing.

The printers have also received ‘Superior De-inkability’ certification from the renowned industry-body INGEDE, meaning toner can be easily removed from print produced by the presses. This ensures that any printed output can be more easily recycled, further enhancing the sustainability credentials of the presses.

The print outputs of the Revoria Press SC285 & SC285S were tested according to INGEDE Method 11 and assessed according to the ‘Assessment of Printed Product Recyclability – De-inkability Score’ (EPRC 2017).

The total score is 100/100 achievable points

The Revoria Press SC285 & SC285S incorporate a completely new ‘Vertical Development System’, along with an ultra-compact LED printhead. The result is a 5 colour press which is the same size as its 4 colour predecessor, the Revoria Press SC180/170.

Revoria Flow incorporates a new feature called User Image Colour Matching (UICM) which can be used to match the colours of a previous print job, even if it was printed on another press. This applies even if you do not know the previous print settings or output conditions, allowing you to reprint jobs that are a colour match.

This is possible because the Revoria Press SC285 & SC285S incorporate a scanning unit that can be used to scan a previous job. Revoria Flow then creates a CMYK device link profile and allocates it to the job.

The Revoria Press EC1100 achieves high productivity printing of 100ppm on both coated and uncoated paper up to 300g in weight. Even on heavier weight media between 300g and 400g, a high speed is maintained at 80ppm.

This system is different to most others on the market, giving ultra-reliable and consistent paper feeding and therefore print performance.

This saves time, optimises quality and improves the efficiency of production for simple, more reliable operation. This is particularly useful for longer banner paper, which has a tendency to skew or suffer from mis-registration without these automated adjustments.

Optimise print conditions for each paper type with built in media library

Minimise adjustments when setting up print jobs by using pre-registered paper type settings in the media library such as voltage and curl. Alternatively, you can customise the pre-loaded recommended paper list and save up to 1,000 different paper type setting for faster setup.

Auto sheet clearing after paper jam

Significantly reduce the time taken to clear a paper jam with the automated clearing of the remaining paper after a jam. When a paper jam does occur, offset pages are inserted to identify any missing or repeated pages.

Handles various media weights from 52g to 400g

Everything from thin folded flyers to thick business cards can be printed. Additionally, not only can it handle heavier weight longer papers (350g up to 660mm, 300g up to 864mm) but the efficient media handling and versatility mean a wide range of customer needs can be met. In addition, high speed envelope printing can be achieved without an additional fuser.

Wide range of paper sizes, along with long banner paper of 1200 mm

The printer supports a wide range of paper sizes, from 148 x 98 mm (smaller than a postcard) up to 1200 x 330mm banner paper. The Multi Sheet Inserter for banner printing can print single-sided long paper from 660 x 330mm up to 1200 x 330mm, depending on the configuration, and duplex long paper up to 864 x330 mm, opening up new application and business opportunities. The Revoria Press EC1100 performs automated alignment adjustments to prevent paper skew or mis-registration which can often occur for longer banner papers to ensure ultra-reliable operation.

10-bit processing and half tone smoothing

2400 dpi resolution and excellent registration

The VCSEL-ROS laser provides 2400 dpi print resolution while the energy-efficient EA-Eco toner* achieves superb results on either coated or uncoated paper to deliver high quality images comparable to offset printing. In addition, the front/back registration of up to 0.5mm (0.8mm from standard trays) ensures high quality duplex printing.

* Emulsion Aggregation-Eco Toner

High productivity of 80 ppm on mixed media jobs

The Revoria Press SC180 & SC170 achieves high productivity printing of 80ppm on both coated and uncoated paper up to 220g in weight. Even on heavier weight media between 300g and 400g, a high speed is maintained at 60ppm.

Optional Air Suction Feeder ensures ultra-reliable media handling for all media types
Like an offset feeder, each sheet is picked up and delivered securely by the shuttle head using air suction, improving the paper feeding performance for low quality, textured and coated media. This system is different to most others on the market, giving ultra-reliable and consistent paper feeding and therefore print performance.

Handles various media weights from 52g to 400g

Everything from thin folded flyers to thick business cards can be printed. Additionally, not only can it handle heavier weight longer papers (350g up to 660mm, 300g up to 864mm) but the efficient media handling and versatility mean a wide range of customer needs can be met. In addition, high speed envelope printing can be achieved without an additional fuser.

Wide range of paper sizes, along with long banner paper of 1200 mm

The printer supports a wide range of paper sizes, from 148 x 98 mm (smaller than a postcard) up to 1200 x 330mm banner paper. The Multi Sheet Inserter for banner printing can print single-sided long paper from 660 x 330mm up to 1200 x 330mm, depending on the configuration, and duplex long paper up to 864 x330 mm, opening up new application and business opportunities. The Revoria Press SC180 & SC170 perform alignment adjustments to prevent paper skew or mis-registration which can often occur for longer banner papers to
ensure ultra-reliable operation.

2400 dpi resolution and excellent registration

The VCSEL-ROS laser provides 2400 dpi print resolution while the energy efficient EA-Eco toner* achieves superb results on either coated or uncoated paper to deliver high quality images comparable to offset printing. In addition, the front/back registration of up to 0.5mm (0.8mm from standard trays) ensures high quality duplex printing.